Mitsubishi Electric GOT 1000 Series, Connection Manual

Page: 136 / 436

3 - 22
3. CONNECTION TO AZBIL CONTROL EQUIPMENT
3.3 Connection Diagram
3.3 Connection Diagram
The following diagram shows the connection between the
GOT and the control equipment.
3.3.1 RS-232 cable

Connection diagram
RS232 connection diagram 2)

Precautions when preparing a cable
(1) Cable length
The length of the RS-232 cable must be 15m or less.
(2) GOT side connector
For the GOT side connector, refer to the following.
1.4.1 GOT connector specifications
(3) AZBIL control equipment side connector
Use the connector compatible with the AZBIL control
equipment side module.
For details, refer to the user's manual of the AZBIL
control equipment
*1 Pin No. of temperature controller differs depending on model and optional function model.
Refer to the following table. The numbers in ( ) of the following table correspond to optional function models.
RS232 connection diagram 1)
*1 For details on the setting method of the TERMINAL mode,
refer to the following.
3.5.5 Connecting to CMC10L
GOT side
Interface converter(CMC10L)*1
-
RD(RXD)
SD(TXD)
ER(DTR)
SG
DR(DSR)
RS(RTS)
CS(CTS)
NC
FG
1
2
3
4
5
6
7
8
9
-
8
3
2
7
5
CS
SD
RD
RS
SG
GOT side
Temperature
controller side
-
RD(RXD)
SD(TXD)
ER(DTR)
SG
DR(DSR)
RS(RTS)
CS(CTS)
NC
FG
1
2
3
4
5
6
7
8
9
-
SG
SD
RD
*1
Signal name
Model of temperature controller
SDC20 SDC21
SDC40A, SDC40B, SDC40G
AHC2001
(03, 05) (10) (04, 07, 09) CPU module SCU module
Pin No. Pin No. Pin No. Pin No. Pin No. Pin No.
SG 5 18 29 61 5 5
SD 17 16 27 60 3 3
RD 18 17 28 59 2 2