70
8
PROGRAMMING EXAMPLES
This chapter provides programming examples which control the inverter with sequence programs.
Item
Program example
Refer to page
Reading the inverter status
Reading the inverter status from the buffer memory of the master station
Setting the operation mode
Selecting the Network operation mode
Setting the operation commands
Commanding the forward rotation and middle speed signals
Setting the monitoring function
Monitoring the output frequency
Reading a parameter value
Reading the value of
Pr.7 Acceleration time
Writing a parameter value
Setting "3.0 s" in
Pr.7 Acceleration time
Setting the running frequency
(running speed)
Setting to 50.00 Hz
Reading the fault records
Reading the inverter faults
Inverter reset
Perform inverter reset at an inverter alarm occurrence.