Mitsubishi Electric FR-A8NCE, Instruction Manual

Page: 53 / 90

52
I/O SIGNAL LIST

Valid only for the FR-A800 series.

The torque limit is available only when the inverter supports this function. (Refer to page 68 .)

When Pr. 128 = "50, 51, 60, 61", they are valid.

Instructions will be processed in the order they are received. Thus, the read value of an instruction may differ at different timings if other
writing requests are being made.

"n" indicates a value determined according to the station number setting.

Valid only for the FR-F800 series.
RWwn+6D to
RWwn+7F
Reserved —
RWrn+6D Motor thermal load factor 62
RWrn+6E Inverter thermal load factor 62
RWrn+6F Reserved —
RWrn+70 PTC thermistor value 62
RWrn+71
Reserved —
RWrn+72
RWrn+73 PID measured value 2 62
RWrn+74 Emergency drive status

62
RWrn+75
Reserved —
RWrn+76
RWrn+77 Cumulative pulse

62
RWrn+78 Cumulative pulse carrying-over times

62
RWrn+79
Cumulative pulse (control terminal option)

62
RWrn+7A
Cumulative pulse carrying-over times
(control terminal option)

62
RWrn+7B to
RWrn+7F
Reserved —
Address

Description Refer
to
page
Address

Description Refer
to
page
Upper 8 bits Lower 8 bits Upper 8 bits Lower 8 bits