24
6
Service and Maintenance
en
Engineers Forms
Commissioning/Field settings record sheet
Main remote controller screen
Parameters
Default setting Field
setting Notes
Setting
Service menu
Energy
monitor
settings
Electric heater
capacity
Booster heater 1
capacity
0 - 30kW
2kW
Booster heater 2
capacity
0 - 30kW
4kW
Analog output
0 - 30kW
0kW
Delivered energy adjustment
−50 - +50%
0%
Water pump
input
Pump 1
0 - 200W or ***(factory fitted pump)
***
Electric energy meter
0.1/1/10/100/1000 pulse/kWh
1 pulse/kWh
Heat meter
0.1/1/10/100/1000 pulse/kWh
1 pulse/kWh
External in-
put settings
Demand control (IN4)
Heat source OFF
Heat source
OFF
Outdoor thermostat (IN5)
Heater operation
Heat source
OFF
Thermo ON output
Zone1
Zone1
*1 The lower limit is -15°C depending on the connected outdoor unit.
*2 The lower limit is -13°C depending on the connected outdoor unit.
*3 The lower limit is -14°C depending on the connected outdoor unit.
*4 On: the function is active; Off: the function is inactive.
*5 Do not change the setting since it is set according to the specification of flow sensor attached to the hydrobox.
*6 Valid only when operating in Heating room temperature.
*7 When DIP SW5-2 is set to OFF, the function is active.
*8 If asterisk (**) is chosen freeze stat function is deactivated. (i.e. primary water freeze risk)
