Mitsubishi Electric DX-VS1UE, Setup Manual

Page: 15 / 32

DX-VS1UE Setup Guide
14
INSTALLATION AND CONNECTION DX-VS1UE
Connecting DX-VS1UE to Local Network
1) Connect DX-VS1UE to a hub with straight cable.
2) Connect a digital recorder or an external camera to the video input terminal of DX-VS1UE
with BNC cable.
3) Connect the supplied AC Adapter to DX-VS1UE.
<NOTE>
1. Note that power cable must be connected after Ethernet cable is connected for avoiding
damage on DX-VS1UE
2. Connect Ethernet cable to the Ethernet plug of DX-VS1UE firmly.
3. Check the LED of DX-VS1UE after supplying power. After power is supplied, yellow LED
is on for the first 4-5 seconds and then it goes off, and green LED is on for the first 1-2
seconds, and then it blinks once at every one second as long as the network is connected.
Configuring IP Address with Setup Program
1. Insert the supplied CD-ROM into your CD-ROM drive.
2. Open the file named “DX-VS1UESetup.exe”.
After the setup program starts up, All DX-VS1UEs on the same network as your PC are listed.
Default IP address of DX-VS1UE is "192.168.1.100".
ENGLISH