74
Restore
System Menu
Restore Data to Main HDD from Drive 1/2/
Export Drive 1/2 Configuration
This item is used to restore the data from the copy device to
the main device.
1
2
1+2
Restore
4
steps
1, 2
step
4
step
3
Restore Data to Main HDD from Drive 1/2
Range of Restore
Export Drive 1/2 Configuration
System Menu
step
1.
Set the camera number to be restored.
• The button function changes between “All Off”
and “All On” each time you select this button.
You can switch on and off for all the cameras
easily by using this button.
step
2.
Set the other detailed settings.
From Device:
Sets the device which contains the
data to be restored. The available setting items
are “Copy 1” and “Copy 2.”
From Group:
Sets the group which contains the
data to be restored.
To Main:
Sets the restore destination area. The
available setting items are “Normal,” “Alarm,” and
“LPA.”
Overwrite:
Selects whether or not to overwrite the
existing data.
“Alarm” appears for “To Main” when “Alarm Recording
Area” (
page 77 “Change Partition Setting”) is set to
other than “0 %.”
“LPA” appears for “To Main” when “Long Pre-Alarm Area”
(
page 77 “Change Partition Setting”) is set to other
than “0 %.”
step
3.
Set the start or start/end points of restoring.
Start:
Sets only the start point of restoring.
Start/End:
Sets the start and end points of
restoring.
• To restore from the oldest data, select “Set Start
Time.” To restore to the latest data, select “Set
End Time.”
step
4.
Select “Execute.”
• Restoring starts.
Restore cannot be performed during recording, playback,
or copying.
However, restore is available during following playback:
• playback the data of copy 1 device
• playback the data of copy 2 device
• restore destination is set to the area which is not being
used for playback
Restore is stopped at the end point of main device
regardless of the repeat recording setting of the main
device to be restored.
To start restoring again, clear the warning display, and
then delete the data or set “Overwrite” to “On.”
To start normal recording, clear the warning display first.
The picture data is processed in 2 MB unit. Therefore the
data is restored in 2 MB unit from the start point of the
designated range.
