69
Operations
ENGLISH
Menu Data
Setup Menu
This menu is used to update and save the menu settings of
this unit. This is done by loading the menu settings which is
copied from another DX-TL4516E/DX-TL4516E(Z) via the
external media such as USB memory, the DVD disc, or CD
available for this unit.
During loading or saving the menu data, other operations
are not accepted.
USB memory is usable only when the HDD is registered
for main device.
Load Menu Data
This item is used to update the menu settings of this unit by
loading the menu settings copied on the external media.
To load or change the menu settings stored on the
external media, set the HDD settings (partition setting) of
this unit to the same settings as the recorder which has
been used for copying the menu settings. When these
settings are different between this unit and the recorder
which has been used for copying, the menu settings
cannot be updated.
The menu setting cannot be updated by using the menu
data of which the format is different. (For example, the
construction of the menu has been changed due to the
addition of the function, etc.)
1
1
Menu Data
5
step
3
steps
1, 2
Setup Menu
Load Menu Data
Load Menu Device Selection
step
1.
Select the device and the group to be used for
loading the menu settings.
step
2.
Select “Eject” to eject the device.
•
“Eject” appears only when the device selected
on step 1 can be ejected.
step
3.
Select “Execute.”
•
The menu settings of this unit is updated and
“Menu settings data is loaded.” appears on the
screen.
•
When the medium to be used for loading the
menu is not prepared, “Media does not exist.”
appears on the screen.
When loading the data with the setting of “IP Address,”
“Sub Net Mask,” “Gateway,” “Service Port Setting” of LAN
or menu language selection changed, the power turns off
automatically. Then this unit restarts.
The clock of the unit is not adjusted when the menu
loading is completed. Adjust the time setting.
Loading the menu data is available only while the unit
is in stop mode (not in playback, recording, backup, or
communication).
Save Menu Data
This item is used to save the menu settings of this unit to the
external device.
Menu Data
5
2
1
step
3
steps
1, 2
Setup Menu
Save Menu Data
Save Menu Device Selection
step
1.
Select the device and the group to be used for
saving the menu settings of this unit.
step
2.
Select “Eject” to eject the device.
•
“Eject” appears only when the device selected
on step 1 can be ejected.
step
3.
Select “Execute.”
•
The menu settings are saved to the external
device.
•
The menu can be saved even during playback
or recording.
•
When completing saving, “Menu settings data is
saved.” appears on the screen.
•
When the medium to be used for saving the
menu is not prepared, “Media does not exist.”
appears on the screen.
Loading or saving the menu data may take a few seconds
to start after selecting “Execute.”
The menu items to be loaded or saved are marked with *
on the check list on
pages 110 to 125.
