14
GB
3. Function Selection
Function selection of remote controller
The setting of the following remote controller functions can be changed using the remote controller function selection mode. Change the setting when needed.
Function selection flowchart
[1] Stop the unit to start remote controller function selection mode.
[2] Select from item 1.
[3] Select from item 2.
[4] Make the setting. (Details are specified in item 3)
[5] Setting completed.
[6] Change the display to the normal one. (End)
Item 1
Item 2
Item 3 (Setting content)
1. Change Language
(“CHANGE
LANGUAGE”)
Language setting to display
•
Display in multiple languages is possible
2. Function limit
(“FUNCTION
SELECTION”)
(1) Operation function limit setting (operation lock) (“LOCKING
FUNCTION”)
•
Setting the range of operation limit (operation lock)
(2) Operation mode skip setting (“SELECT MODE”)
•
Setting the use or non-use of each operation mode
(3) Temperature range limit setting (“LIMIT TEMP FUNCTION”)
•
Setting the temperature adjustable range (maximum, minimum)
3. Mode selection
(“MODE
SELECTION”)
(1) Remote controller main/sub setting (“CONTROLLER MAIN/
SUB”)
•
Selecting main or sub remote controller
* When two remote controllers are connected to one group, one controller
must be set to sub.
(2) Use of clock setting (“CLOCK”)
•
Setting the use or non-use of clock function
(3) Timer function setting (“WEEKLY TIMER”)
•
Setting the timer type
(4) Contact number setting for error situation (“CALL.”)
•
Contact number display in case of error
•
Setting the telephone number
(5) Temp off set setting (“TEMP OFF SET FUNCTION”)
•
Setting the use or non-use of setback amount setting
4. Display change
(“DISP MODE
SETTING”)
(1) Temperature display °C/°F setting (“TEMP MODE °C/°F”)
•
Setting the temperature unit (°C or °F) to display
(2) Water temperature display setting (“WATER TEMP DISP
SELECT”)
•
Setting the use or non-use of the display of water temperature
Change Language
(“CHANGE LANGUAGE”)
Operation function limit setting (“LOCKING FUNCTION”)
Press the
G
button.
Operation mode skip setting (“SELECT MODE”)
Temperature range limit setting (“LIMIT TEMP FUNCTION”)
Press the
D
button.
See [3]–2. (1)
See [3]–2. (2)
See [3]–2. (3)
Dot display
The language that is selected in
CHANGE LANGUAGE mode
appears on this display. English
is set in this manual.
Press the
G
button.
Function limit
(“FUNCTION
SELECTION”)
Press the
E
button.
Remote controller main/sub setting (“CONTROLLER MAIN/SUB”)
Press the
G
button.
Timer function setting (“WEEKLY TIMER”)
Temp off set setting (“TEMP OFF SET FUNCTION”)
Press the
D
button.
See [3]–3. (1)
See [3]–3. (3)
See [3]–3. (5)
Press the
G
button.
Mode selection
(“MODE
SELECTION”)
Press the
E
button.
Press the
G
button.
Temperature display °C/°F setting (“TEMP MODE °C/°F”)
Water temperature display setting (“WATER TEMP DISP SELECT”)
Press the
D
button.
See [3]–4. (1)
See [3]–4. (2)
Press the
G
button.
Display change
(“DISP MODE
SETTING”)
Press the
E
button.
Use of clock setting (“CLOCK”)
See [3]–3. (2)
Contact number setting for error situation (“CALL.”)
See [3]–3. (4)
Press the
E
button.
Item 2
See [3]–1
Item 3
(Setting content)
Remote Controller Function
Selection Mode
Press the
G
button.
Item 1
Normal display (Display when
the unit is not running)
(Hold down the
E
button and press the
D
button for two
seconds.)
* The display cannot be changed during the test run and
the self diagnosis.
(Hold down the
E
button and press
the
D
button for two seconds.)
* The remote controller records the
setting that is made in this way.
NOTE
Timer operation stops when the display
for remote controller function selection is
changed to the normal one.
WT07508X01.book 14 ページ ２０１５年１月２６日 月曜日 午前１１時５分
