21
8-5.DRAIN PUMP and DRAIN SENSOR
OPERATING PROCEDURE
1. Remove the service panel and filter with the pro-
cedure explained in section 8-1.
2. Remove the decorative panel frame with the pro-
cedure explained in section 8-4.
3. Remove the bell-mouth with the procedure
explained in section 8-3.
4. Remove the control box with the procedure
explained in section 8-4.
5. Remove the drain pan with the procedure
explained in section 8-4.
6. Remove the binding band on the drain hose con-
nected to the drain pump.
7. The drain pump and drain sensor, fixed to the
cover, are fixed to the main unit. Remove the two
fixing screws and remove. (Photograph 6-1)
(Photo.6-1)
PHOTOS&ILLUSTRATIONS
Fixing screw
Be careful removing heavy parts.
