4
TIMER SET
ON/OFF
˚C
˚C
1Hr.
FILTER
CHECK TEST
TEMP.
F
1
A
B
C
D
E
2. Operation
2.3. Selecting a temperature
TEMP.
s
s
s
s
s
To decrease the room temperature:
1
Press
button to set the desired temperature.
A
The selected temperature is displayed.
• Each time you press the button, the temperature value decreases by
1 °C.
s
s
s
s
s
To increase the room temperature:
1
Press
button to set the desired temperature.
A
The selected temperature is displayed.
• Each time you press the button, the temperature value increases by
1 °C.
• Available temperature ranges are as follows:
Cooling & Drying:
19 - 30 °C
Heating:
17 - 28 °C
Automatic:
19 - 28 °C
Circulation:
— (Not available)
• The display flashes either 8 °C - 39 °C to inform you if the room tem-
perature is lower or higher than the displayed temperature.
2.4. Selecting a fan speed
1
Press
button to select a desired fan speed.
• Each time you press the button, available options change with the dis-
play
A
on the remote controller, as shown below.
Fan speed
Remote controller display
Low
Medium
High
3-stage
The display and the fan speed of the unit will differ in the following situa-
tions:
• When STAND BY and DEFROST are displayed.
• Just after the heating mode (while waiting to change to another mode).
• When the temperature of the room is higher than the temperature set-
ting of the unit operating in the heating mode.
• In the dry operation, the indoor fan automatically turns to low-speed
operation. Switching of fan speed is impossible.
2.5. Adjusting vertical airflow direction
The vertical air vane helps select the vertical direction of the airflow.
1
Press
button to select the vertical airflow direction.
• Each time you press the button, the option changes are displayed on
the remote controller, as shown below.
A
(Swing)
→
B
→
C
→
D
→
E
→
A
• If the room temperature is higher than the temperature set on the re-
mote controller while the unit is defrosting or preparing for heating, the
vertical air vane will move to the horizontal airflow position (
B
).
• In either cooling or dry mode, if you select
C
,
D
or
E
when the fan
speed is low, middle 2, a display reading “1Hr.”
F
will appear.
After one hour, the air conditioner will switch automatically to horizontal
air mode
B
and the display “1Hr.”
F
will disappear.
• When the heating thermostat is OFF, the louver automatically turns hori-
zontally during defrosting or preparation for heating.
TIMER SET
ON/OFF
˚C
˚C
FILTER
CHECK TEST
TEMP.
A
1
TIMER SET
ON/OFF
˚C
˚C
FILTER
CHECK TEST
TEMP.
A
1
▼
▼
▼
Summary of Contents for City Multi PLFY-P VCM-E
Page 57: ......
