8
GB
Each air conditioner has its own Address No. of indoor unit (Example
below).
Address No. of indoor unit can be set ranging from "01" to "50".
To find air conditioner No. to set, refer to the procedures below.
Air conditioner No. is found by its airflow direction with
Address No. of
indoor unit changed one after the other.
How to find air conditioner No.
<Process to find air conditioner No.>
[1] To check Address No. of indoor unit
1. Press Mode button (Return button) and Address No. of indoor unit
blinks.
Adjust address No. of indoor unit to "01" with Set Temperature button
.
2. Press Filter button to send the information on remote controller.
3. Wait for 15 seconds . How does the air conditioner run?
Only air from the outlet which No. displayed on remote controller
blows downward.
Address No.01 of indoor unit is the air conditioner No..
All outlets are closed.
Go to step [2].
[2] To check by changing Address No. of indoor unit one after the
other (Maximum unit No. is 50)
1. Press Mode button (Return button) and Address No. of indoor unit
blinks.
To clear fixed setting
To clear all fixed setting(reset to factory default), press
check button(clear
botton)
for more than 3 seconds in fixed airflow direction mode.
Display of remote controller blinks and the set information is cleared.
Note:
This operation clears the fixed setting information of all air
conditioner connected to the remote controller.
Outlet No. Up/Down
air direction
Address No. of indoor unit
Outlet No.
Up/Down
air direction
Addres No. of indoor unit
Err
Adjust to the next address No.with Set Temperature button .
2. Press Filter button to send the information on remote controller.
3. Wait for 15 seconds after sending. How does the air conditioner run?
Only air from the outlet which No. displayed on remote controller blows
downward.
No. displayed in remote controller is air conditioner No. (Checking
completed)
All outlets are closed.
Repeat [1] and continue this procedure.
"Err" is displayed on remote controller.
This groupe does not have this address No. of indoor unit.(Go
back to [1] and continue .)
5. Operation
(00)
01
(00)
02
(00)
03
Example) Structure of the system
Switch setting of the address
Indoor unit
Address No. of indoor unit
MA remote controller
(01)
01
(02)
02
(03)
03
Switch setting of the address
Indoor unit
Address No. of indoor unit
MA remote controller
When the Switch setting of the address is "00",
address No. of indoor unit is given automatically
When the Switch setting of the address is not "00", switch
setting of the address is also address No. of indoor unit.
01_RG79D836H01_EN.indd 8
2012/10/24 8:41:20