Mitsubishi Electric City Multi PLFY-P-VBM-E, Operation Manual

Page: 12 / 20

12
GB
AFTER
TIMER
OFF
AUTO OFF
Timer Setting
°C
°C
AUTO OFF
AUTO OFF
°C
°C
AFTER OFF
AUTO OFF
7. Other Functions
°C
°C
FUNCTION
°C
°C
FUNCTION
°C
°C
6. Timer
<Checking the Current Auto Off Timer Setting>
1. Be sure that the “Auto Off” is visible on the screen (at ).
2. Hold down the Timer Menu button for
seconds so that “Monitor”
is indicated on the screen (at ).
• The timer remaining to shutdown appears at .
3. To close the monitor and return to the standard control screen, press
the Mode (Return) button .
<To Turn Off the Auto Off Timer>
Hold down the Timer On/Off button for seconds so that “Timer
Off” appears (at ) and the timer value (at ) disappears.
Alternatively, turn off the air conditioner itself. The timer value (at )
will disappear from the screen.
<To Turn On the Auto Off Timer>
Hold down the Timer On/Off button for seconds . The “Timer Off”
indication disappears (at ), and the timer setting comes on the dis-
play (at ).
Alternatively, turn on the air conditioner. The timer value will appear at
.
7.1. Locking the Remote Controller Buttons (Operation
function limit controller)
If you wish, you can lock the remote controller buttons. You can use
the Function Selection of remote controller to select which type of lock
to use. (For information about selecting the lock type, see section 8,
item [4]–2 (1)).
Specifically, you can use either of the following two lock types.
Lock All Buttons:
Locks all of the buttons on the remote controller.
Lock All Except ON/OFF:
Locks all buttons other than the ON/OFF button.
Note:
The “Locked” indicator appears on the screen to indicate that buttons are
currently locked.
<How to Lock the Buttons>
1. While holding down the Filter button , press and hold down the ON/
OFF button for 2 seconds. The “Locked” indication appears on the
screen (at ), indicating that the lock is now engaged.
* If locking has been disabled in Function Selection of remote control-
ler, the screen will display the “Not Available” message when you
press the buttons as described above.
• If you press a locked button, the “Locked” indication (at ) will blink
on the display.
<How to Unlock the Buttons>
1. While holding down the Filter button , press and hold down the ON/
OFF button for 2 seconds so that the “Locked” indication disappears
from the screen (at ).
°C
°C
TIME SUN
FUNCTION
PAR-21MAA
ON/OFF
FILTER
CHECK
OPERATION
CLEAR
TEST
TEMP.
MENU
BACK DAY MONITOR/SET
CLOCK
ON/OFF
Locked Indicator
01_RG79D836H01_EN.indd 12 2012/10/24 8:41:24