Mitsubishi Electric CC-Link-AnyWire Bitty Bridge, User Manual

Page: 43 / 74

41
CHAPTER 7 PREPARATION FOR OPERATION
7
7.
1 Set
ting by t
h
e Par
a
met
e
r
(2) Correlation among the CPU module, master module, NZ2AW1C1BY, and
AnyWire Bitty remote I/O module
(3) Parameter setting
Parameter setting is required for CC-Link communication between the master station and the NZ2AW1C1BY.
Parameter setting for CC-Link can be configured by the network parameter of the programming tool. (Setting can
be also configured on the program.)
Configure the parameter setting using either the network parameter setting or program.
Redundant settings by different means may cause unstable output because of the overlapped access to the buffer memory.
Device (X)
X1000 to X107F
Device (Y)
Device D
Device D
Y1000 to Y107F
D1000
D1001
D100F
D1100
D1101
D110F
Remote input (RX)
Remote register (RWw)
Remote register (RWr)
RX00 to RX7F
Remote output (RY)
RY00 to RY7F
RWw0 AnyWire output address:
0 to 15
RWr0 AnyWire input address:
0 to 15
AnyWire Bitty output address
AnyWire Bitty output
remote I/O module
address: 0 to 15
AnyWire Bitty input address
AnyWire Bitty input
remote I/O module
address: 0 to 15
RWr1 AnyWire input address:
16 to 31
RWrF AnyWire input address:
240 to 255
RWw1 AnyWire output address:
16 to 31
RWwF AnyWire output address:
240 to 255
Remote input (RX)
Address
E0
H
to
E7
H
160
H
to
167
H
RX00 to RX7F
Remote output (RY)
Remote register (RWw)
Remote register (RWr)
RY00 to RY7F
RW
W
0
RW
r
0
RW
r
1
RW
r
F
RW
W
1
RW
W
F
1E0
H
1E1
H
1EF
H
2E0
H
2E1
H
2EF
H
CPU module
NZ2AW1C1BY
(station No.1)
AnyWire Bitty
remote I/O module
Master module