3. TV Menus
23
For assistance call 1(800) 332-2119
Use the TV’s channel menus to:
Save a list of favorite channels (see
• page
10
).
Define the source for the antenna input
•
Perform a channel scan
•
Limit
•
CH
/
CH
tuning to only the channels you want
Selectively scan for new channels
•
Add a single channel by RF channel number
•
Favorites
See page 10 for use of the
Favorites
menu.
Editing the Channel List
Use the
•
Channel Edit
menu so the TV tunes only to
the selected channels when using the
CH
/ key.
Channels marked with a check are in memory.
•
Press
•
to move through channel numbers one
at a time.
To add or delete a channel from
•
memory, highlight
the channel number and press
ENTER
to remove the
check.
To jump to a channel, enter the channel number,
•
including separator, and press
ENTER
. For example,
to jump to 36-1:
3
6
1
ENTER
.
Use the
•
Mark All
or
Unmark All
options if working
with many channel numbers.
Enter the channel number to jump quickly to a channel.
Checked channels can be tuned with the
CH
/ key.
Cha nnels
Changing the Channel Source
Highlight the source connected to the TV’s antenna
input.
Air
•
if you have an over-the-air antenna
Cable
•
if you have direct cable service without a
box.
Press
ENTER
to confirm your selection.
Scanning Channels
Perform a channel scan after
Initializing the TV
•
Changing the source (switching between an over-
•
the-air antenna and direct cable service)
Repositioning the antenna
•
Transporting the TV to a different area
•
The channel scan will erase all custom channel settings
(channel locks, favorite channels, channel-list edits).
Note:
Additive Scan
must be
OFF
to enable a full
channel scan.
