English-39
English
OSD screen functions (continued)
CONFIGURATION2
LANGUAGE
OSD control menus are available in eight languages.
(English, German, Spanish, French, Italian, Swedish,
Chinese, and Japanese)
OSD TURN OFF
The OSD control menu will stay on as long as it is used.
The preset choices are 5 -120 seconds.
OSD H POSITION
You can adjust the horizontal position of the OSD menu.
OSD V POSITION
You can adjust the vertical position of the OSD menu.
INFORMATION OSD
You can enable and disable the information OSD display.
The display time is selectable from 1 to 10 seconds.
NOTE : The information OSD display shows a message
when the input source is switched, the input signal
state is changed, or the input signal has an error.
MONITOR INFORMATION
The model name and the serial number of your monitor are
displayed.
MONITOR ID
ID numbers for wireless remote control are assigned to
LDT323V monitors that are multi-connected via RS-232C.
ID numbers 1 to 26 are selectable.
IR CONTROL
You can lock the wireless remote control.
Select from the following two modes using the
and
buttons and then determine the selected mode by pressing
the SET button.
NORMAL:
All the remote control operations are
enabled.
LOCK:
All the remote control operations are
disabled.
NOTE: When you hold down the DISPLAY button on the
wireless remote control for at least 5 seconds, the
NORMAL mode is activated.
You can lock the wireless remote control
independently from the control buttons on the
bottom of the monitor. See page 42.
TILING
You can enlarge an image across multiple screens.
A single large screen can be confi gured with up to 25
monitors. You can also divide the displayed image into up
to 5 pieces horizontally and vertically.
NOTE : A same video signal needs to be input to each
monitor. When different monitors need to be
adjusted so that their tint can be identical, it
is recommended to use a signal distributor
(commercially available).
When TILING is activated, PIP, POP, SBS, and STILL
are disabled.
TILING doesn’t work in the REAL picture size mode.
H MONITORS: Select the number of images obtained by
horizontal division.
V MONITORS:
Select the number of images obtained by
vertical division.
POSITION:
Select the area you want to enlarge.
FRAME COMP.: When displaying an image across multiple
monitors, you can select the mode to
compensate for the bezel widths for
smooth and natural display.
ENABLE:
When you select ON, the image in the
selected area is enlarged on the screen.
POWER ON DELAY
You can adjust the delayed time until the power-on mode
is activated at the time of recovery from the sleep mode or
power-on.
The time is selectable from OFF and 2, 4, 6, 8, 10, 20, 30,
40, and 50 seconds.
CLOSED CAPTION
You can select to display or hide captions.
OFF:
Captions are hidden.
CC1:
Captions are displayed in sync with the
primary audio.
CC2:
Information (related to the primary
audio) is displayed without sync.
CC3:
Captions are displayed in sync with the
secondary audio.
CC4:
Information (related to the secondary
audio) is displayed without sync.
TT1/TT2/TT3/TT4: Four types of information not related to
the displayed images are displayed. (For
example, news and weather forecast.)
NOTE : Check with each supplier of your video software
and external video devices in advance whether they
are compliant with EIA-608-A.
If their video signals are not compliant with it,
images may not be displayed correctly.
CONFIGURATION2 RESET
You can reset all the CONFIGURATION2 settings to the
factory defaults.
