manualshive.com logo in svg

Mitsubishi Electric AT-50B, Instruction Book, Page: 60 / 68

Share
Download
Mitsubishi Electric AT-50B Instruction Book Download Page 60

60

To check the information about the units whose maintenance signs are 

turned on

1. Touch the 

3

 [Maintenance Sign] tab, and check the number of units whose maintenance signs are 

turned on, the names of the groups they belong to, and their addresses.

•  When a filter sign appears, clean, wash, or replace the filter as necessary. 

 

Refer to air conditioner or LOSSNAY manual for details.

•  When 

 appears on the 

Reset

 button, the button will not be available. 

To reset the maintenance sign (for example, after cleaning the filter)

4

 

Reset

 button     

：

Clears the specific maintenance sign.

5

 

All Reset

 button

： 

Clears all filter signs.  

(This button is not available for the Air To Water (PWFY) groups.)

3

5

 

Number of maintenance signs detected 

Displays the number of maintenance signs 

that have been detected.

4

Usage - Main Menu Settings

System Management (cont'd)

Summary of Contents for AT-50B





































































Reviews:

No comments