When you have fully
connected your system
press the
Power button
to
turn the computer on.
When the system unit
is powered the power
indicator on the left of
the front panel will light
up. If nothing happens,
check your connections and
supply switch.
Refer to the “Troubleshooting” chapter in the Owner’s Handbook if you
encounter any problems.
Power Up
1
Remember that the monitor has its own power switch; see the monitor’s
User’s Guide for details.
The
Standby button
can be used to both place the system into an energy
saving mode or restore it to
normal operation. Next
to this button is an
LED which lights
up during either of
the Energy Saving
modes. Further
details are provided
on the last page of this
guide.
The system will now perform a self-test routine and then display the message,
‘
Starting Windows 95
’. This will take several minutes the first time you
switch on, during which time the computer will reboot several times
and you will be requested to register your copy of Windows 95.
COMPACT
BRUNO-QS.PM5
29/11/96, 09:46
2
