5. PROGRAMMING
MELSEC-A
5-1
5. PROGRAMMING
The programming procedure, basic programming for read and write, as well as programming
examples are explained below.
When utilizing the program examples introduced in this chapter for an actual system, fully verify that
controllability in the target system has no problems.
Refer to the user's manual (details) of the master module used for the master module, to Section 3.9
for the remote registers, and to the AnSHCPU/AnACPU/AnUCPU/QCPU-A (A mode) programming
manual (dedicated Instructions) for details of the dedicated instructions.
5.1 Programming
Procedure
Create a program that operates the AJ65BT-64RD connected to the master module in the following
procedure:
*1 When the QCPU (Q mode) is used, initial setting can be made by the remote device station
initialization procedure registration function. When the ACPU, QCPU (A mode) or QnACPU is
used, use a sequence program to make the setting.
*2 Setting cannot be made by the remote device station initialization procedure registration function.
Use a sequence program to make the setting.
Downloaded from
Summary of Contents for AJ65BT-68TD
Page 2: ...Downloaded from ManualsNet com search engine ...
Page 57: ...5 PROGRAMMING MELSEC A 5 8 3 Program example Downloaded from ManualsNet com search engine ...
Page 103: ...APPENDIX MELSEC A A 28 MEMO Downloaded from ManualsNet com search engine ...
Page 105: ...Downloaded from ManualsNet com search engine ...
