435 L/U Brushcutter
18
Original Instructions Version December 12
Engine Oil
This is a 4-stroke engine and is shipped without oil; fill with oil before starting the engine for the
first time. Failure to fill with oil will cause engine damage and will not be covered by warranty.
Recommended oil
Use 4 stroke oil that meets or exceeds API SG/CF specification.
SAE 10W 30 is recommended for general use.
Preparation
1. Place the engine with the fuel tank side downward and horizontally on a level surface.
2. Remove the oil filler cap.
3. Fill with the oil, insert and remove the oil filler cap/dipstick without screwing it into the oil filler neck,
remove it and check the oil level on the dipstick, ensure the oil is up to the full mark on the dipstick.
4. Refit the oil filler cap securely.
Before Operation - Checking the oil
Always check the oil before use or after every 5 hours if operating continuously.
1. Place the engine with the fuel tank side downward and horizontally on a level surface.
2. Remove the oil filler cap.
3. Insert and remove the oil filler cap/dipstick without screwing it into the oil filler neck, remove it and check
the oil level on the dipstick, ensure the oil is up to the full mark on the dipstick.
4. Refit the oil filler cap securely.
