14
SPARK PLUG
•
Poor starting or misfiring is often caused by a fouled or defective spark plug, clean and reset the
gap to 0.65 mm, or replace the spark plug with
NGK: BPRM7A as necessary Fig 17.
AIR FILTER
•
Before using the brush cutter, check the air filter Fig19. Being clogged, will reduce the engine
performance.
•
Remove the air filter cover by undoing the cover screw Fig 18, clean the filter element in
warm, soapy water, dry completely before installing. If the element is broken or shrunk, replace with a
new one.
FIG 18 AIR FILTER COVER SCREW
Fig 19 AIR FILTER
Fig 19 AIR FILTER
3600
28
00
CARBURETTOR
•
The carburettor mixture setting has been set at the factory and will not need adjusting.
•
Adjusting the idle speed Fig 20, if adjustment is necessary turn the
T
screw clock wise (
2)
until the blades start to move, then turn the screw
T
anticlockwise (
3)
until the blades stop.
Fig 20 T screw
•
If the idle speed cannot be adjusted to stop the cutting head moving at idle, contact
your dealer for repair before use.
,
