TA7102 Hardware Installation
153/1531-ANF 901 14 B 2017-03-08
The cabling is away from the following:
Sources of electrical noise such as radios, transmitters, and broadband amplifiers.
Power lines and fluorescent lighting fixtures.
Water or moisture that could enter the casing of the TA7102.
The airflow is not restricted around the TA7102 or through the vents of the unit. The unit requires a
minimum of 25 mm (1 in.) clearance.
The operating temperature is between 0°C and 40°C.
The humidity is not over 85% and is non-condensing.
Wiring Requirements
Make sure that the telephone wiring, LAN and WAN cables reach the device and can be dressed in a
manner that is safe for the wiring, does not pull or create lateral stress on the connectors on the device,
and does not present a trip hazard to personnel working in the vicinity of the equipment. Do not connect
any cable or wiring at this time.
