manualshive.com logo in svg

Mitel MX-ONE, Installation Instruction

The Mitel MX-ONE Installation Instructions Manual is a comprehensive guide to assist users in setting up their MX-ONE communication system. This essential manual is available for easy download, completely free of charge, from our website. Get the detailed instructions you need to install your MX-ONE at manualshive.com.

Share
Download
background image

I

NSTALLING

 B

OARDS

 

AND

 C

ABLING

21

21/1531-ASP11301 Uen B3 2016-02-17

3.3.4 CONNECTING 

POWER 

TO FAN UNIT BFD50908/4

Connect the 2U Power to the fan unit using cable TSR 903 021/5000 (1), see Figure 
14:  Cabling to the Fan Unit BFD50908/4 on page 21.

Note:  

If Alarm handling is required, cables marked with *) are also needed. For alarm 

cables and plugs, see 5.4.2  MiVoice MX-ONE Classic with 2U Power Unit on 
page 48.

Note:  

If only one Power cable is connected to the Fan Unit, the alarm on the Fan will 

be activated. This is not possible to re-configure. To avoid the alarm in the Fan, 
feed the unit with 2 Power cables.

Figure 14:  Cabling to the Fan Unit BFD50908/4

3.3.5 CONNECTING 

POWER 

TO 1U CHASSIS 87L00032XAA-A

Connect the -48V DC power to the 1U chassis using cable TSR9020279/2000. The 
connector on the 1U chassis is located on the rear side of the chassis.

The unit can be fed also with mains power100-240VAC. This connector is also located 
on the rear side.

Summary of Contents for MX-ONE


















































Reviews:

No comments

Related manuals for MX-ONE

Mychanic 52752 Operating Instructions Manual preview
52752
Brand: Mychanic Pages: 13
StarTech.com USB3S2SAT3CB Manual preview
USB3S2SAT3CB
Brand: StarTech.com Pages: 4
HEIDENHAIN ROD 420 TTL Mounting Instructions preview
ROD 420 TTL
Brand: HEIDENHAIN Pages: 28
Clear-Com XLR-7M Fitting Instructions Manual preview
XLR-7M
Brand: Clear-Com Pages: 16
GTV AE- BPW1S1UCH-51 Manual preview
AE- BPW1S1UCH-51
Brand: GTV Pages: 12
W&T 85210 Manual preview
85210
Brand: W&T Pages: 4
OUNEVA OJL 400 C Installation Manual preview
OJL 400 C
Brand: OUNEVA Pages: 2
Siemens 3RT1916-4BB31 Operating Instructions preview
3RT1916-4BB31
Brand: Siemens Pages: 2
Yamaichi Electronics Y-CON Cover-40-PP Assembly Instructions preview
Y-CON Cover-40-PP
Brand: Yamaichi Electronics Pages: 2
Speaka Professional 1499972 Operating Instructions Manual preview
1499972
Brand: Speaka Professional Pages: 8
MSA Workman FP Stryder 10144431 User Instructions preview
Workman FP Stryder 10144431
Brand: MSA Pages: 48
Applied Omni 1x10 User Manual preview
Omni 1x10
Brand: Applied Pages: 9
enphase Engage Cable Quick Install Manual preview
Engage Cable
Brand: enphase Pages: 2
Lindy 40774 User Manual preview
40774
Brand: Lindy Pages: 7
HY-LINE CLUX-1CAT8H Operation Manual preview
CLUX-1CAT8H
Brand: HY-LINE Pages: 16
E1DT E1DT-ASSY-0058 Installation And Operation Manual preview
E1DT-ASSY-0058
Brand: E1DT Pages: 36
3M ECAM-20 MM-D Instructions Manual preview
ECAM-20 MM-D
Brand: 3M Pages: 18
CYP CLUX-4EN Operation Manual preview
CLUX-4EN
Brand: CYP Pages: 12

Brands by name

Popular brands

Load more brands