41-001517-00 REV00 – 10.2014
8
Upgrades, Configuration, and Usage
Upgrading the M680i Expansion Module
The M680i does not require a separate firmware package. M680i software is embedded within the respective phone’s
firmware package.
When the M680i is connected and is powered up, the LED corresponding to the second button on the module will turn
solid red and the module will check to see if an upgrade is required. If it does not have the latest software, the module will
upgrade itself using the phone’s embedded firmware. This process will take approximately 10 seconds, in which case the
LED corresponding to the second button on the M680i will stay solid red for the duration. If the upgrade is successful, the
LED will turn green. If the LED stays solid and red for longer than 10 seconds, the upgrade may have failed. In such scenar-
ios, unplug and reattach the power source from the phone to attempt the upgrade again.
As software upgrades are performed one at a time, each additional M680i connected increases the approximate upgrade
time by 10 seconds (e.g. three connected M680i expansion modules will take approximately 30 seconds to upgrade).
Configuring the M680i Expansion Module
The M680i Expansion Module programmable keys supports a multitude of different functions. You can configure the keys
using the Mitel Web UI at the path,
Operation
->
Expansion Module <N>
(where N is the module number) when modules
are attached to the 6865i, 6867i, or 6869i IP phone.
Notes:
•
On each of the respective Expansion Module <N> pages, the M680i Bootloader version and App version is displayed.
Upgrades to the M680i expansion module are reflected in the App version (i.e. the Bootloader version does not change
when the M680i is upgraded).
•
Refer to the
Mitel Model 6865i IP Phone User Guide, Mitel Model 6867i IP Phone User Guide,
or
Mitel Model 6869i IP
Phone User Guide
for a list of functions and detailed procedures on how to configure the programmable keys.
