1424-EN/LZT103 089 D1 2016-03-04
Mitel DT4x3 Cordless Phones for MiVoice MX-ONE
37
• the handset receives a notification that the alarm has been received by the system.
This is a system dependent feature.
• if configured, the ALS (see
7.5
Acoustic Location Signal
on page 38) is activated
after the alarm has been sent, or a call is established to a pre-defined number (see
7.6
Automatic Call after Alarm
on page 38)
• information about the handset’s location is sent along with an alarm, see
7.3
Alarm
with Location Information
on page 37.
7.2 MAN-DOWN AND NO-MOVEMENT ALARM
Man-down alarm: If the handset is tilted 45 degrees
6
or more for a preset time (default
7 seconds), the Man-down alarm will be triggered.
No-movement alarm: If no movement is detected during a preset time (default 30
seconds), the No-movement alarm will be triggered.
When an alarm is triggered, the following occurs;
• A Man-down warning. Cancel? or No- movement warning. Cancel? dialog window
is shown in the display, and a warning tone is also signaling during a period (default
7 seconds) before the alarm is sent.
• To prevent the alarm from being sent and silencing the warning tone, do one of the
following:
- Press any key/button. The alarm will be reset.
- Put the handset in a charger. The alarm will be temporarily disabled indicated by
that the corresponding alarm icon is hidden. The alarm will be enabled when
removing it from the charger.
• If no key/button is pressed during the warning tone, the alarm is sent. Depending on
set parameters, a beep/vibrator/LED signal confirms that the alarm has been sent.
• Information about the handset’s location may be sent along with the alarm, see
7.3
Alarm with Location Information
on page 37.
See also
8.8.9
Alarm Settings
on page 68.
7.3 ALARM WITH LOCATION INFORMATION
Information about the handset’s location can be sent along with an alarm. The location
can be added as follows;
• An approximately location given by the closest Base Station (see the handset’s
Configuration Manual) or,
Note:
This function requires CPDM3
7.4 ALARM WITH LOCATION INFORMATION
Information about the handset’s location can be sent along with an alarm. The location
can be added as follows;
• An approximately location given by the closest Base Station (see the handset’s
Configuration Manual)
6.The accuracy is -/+10 degrees.
