Mitel DT4X3 User Manual Download | Manualshive

Page: 20 / 90

background image

1424-EN/LZT103 089 D1 2016-03-04

Mitel DT4x3 Cordless Phones for MiVoice MX-ONE

20

There are two desk chargers available; one basic that only charges the handset, and
one with advanced functionality to download new software and to synchronize
parameters. The handset is fully operational while placed in the charger.

The charger is delivered with a plug-in power supply and is connected into an ordinary
wall socket. For more information, see the advanced charger’s

Installation and

Operation Manual.

IMPORTANT:

When charging the EX classified handset, it is only permitted to use a

charger marked with DC3-BxxB or DC4-BxxB?on the label.

Note:

Only use the charger within the temperature range of +5° C – +40° C.

3.2.2 CHARGING RACK

The Rack PDM Charger is used for charging several handsets, to synchronize
parameters, and for software download.

IMPORTANT: If using the Rack PDM charger for charging EX classified handsets, it is
only permitted to use a rack charger marked with 87L00008AAAon the label.

The built in power supply can charge up to six handsets.

See the Charging Rack’s

Installation and Operation Manual.

3.2.3 BATTERY PACK CHARGER

The Battery Pack Charger is used for charging up to six spare batteries.

IMPORTANT:

It is not permitted to charge EX classified batteries using the battery pack

charger.

See the battery pack charger’s

Installation Guide.

3.2.4 CLIPS

Tip:

It is possible to use the handset without any clip on, see

13.5

Attach Cover for No

Clip

on page 81. The belt clips cannot be used if the handset shall be placed in a case.

See

3.2.6

Leather Casing

on page 20 for more information.

There are two belt clips available:

• Hinge-type clip?

?To prevent the handset from slipping out of for example pocket or belt, see

13.3

Attach the Hinge-type Clip

on page 80

.

• Swivel-type clip

To be able to rotate without slipping out from for example pocket or belt, see

13.4

Attach the Swivel-type Clip

on page 80

.

3.2.5 SECURITY CORD

The security cord is 800 mm long. The security cord is attached directly to the handset.

3.2.6 LEATHER CASING

The leather casing is especially designed for the handset. The casing comes with a
swivel type belt clip and the handset is fully operational while placed in the casing.

«
...
18
19
20
21
22
...
»

Summary of Contents for DT4X3



























































































Reviews:

No comments

Related manuals for DT4X3

Brand: Olympia Pages: 28

Brand: AT&T Pages: 124

Brand: Southwestern Bell Pages: 24

Brand: Ryobi Pages: 16

Brand: PhoneMate Pages: 37

Infinite Station

Brand: Vodavi Pages: 38

Brand: Topcom Pages: 21

Brand: Telematrix Pages: 22

Brand: Yada Pages: 14

Brand: GE Pages: 60

Brand: BT Pages: 67

Brand: GE Pages: 38

Brand: GE Pages: 84

Brand: GE Pages: 2

Brand: GE Pages: 2

Brand: GE Pages: 2

Brand: GE Pages: 2

Brand: GE Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands