Mitel Deskphone 6867 User Manual Download Page 2 | Manualshive

Page: 2 / 127

background image

2

Mitel 6867 SIP / Mitel 6869 SIP

eud-1664/1.3 – R5.0 – 06.2017

NOTICE

The information contained in this document is believed to be accurate in all respects but
is not warranted by Mitel Networks Corporation.
The information is subject to change without notice and should not be construed in any
way as a commitment by Mitel or any of its affiliates or subsidiaries. Mitel and its affili-
ates and subsidiaries assume no responsibility for any errors or omissions in this docu-
ment. Revisions of this document or new editions of it may be issued to incorporate such
changes.

No part of this document can be reproduced or transmitted in any form or by any means
- electronic or mechanical - for any purpose without written permission from Mitel Net-
works Corporation.

TRADEMARKS

The trademarks, service marks, logos and graphics (collectively “Trademarks”) appear-
ing on Mitel's Internet sites or in its publications are registered and unregistered trade-
marks of Mitel Networks Corporation (MNC) or its subsidiaries (collectively "Mitel") or
others. Use of the Trademarks is prohibited without the express consent from Mitel.
Please contact our legal department for additional information:

[email protected].

For a list of the worldwide Mitel Networks Corporation registered trademarks, please refer
to the website:

http://www.mitel.com/trademarks.

PATENT NOTE ON POWER OVER ETHERNET

Mitel’s Power over Ethernet (PoE) Powered Device (PD) products are covered by one or
more of the U.S. patents (and any foreign patent counterparts thereto) identified at Mi-
tel’s website:

www.mitel.com/patents.

For more information on the PD patents that are licensed, please refer to:

www.cmspat-

ents.com.

Mitel 6867 SIP / Mitel 6869 SIP

eud-1664/1.3 – 06.2017

®, ™ Trademark of Mitel Networks Corporation

© Copyright 2017 Mitel Networks Corporation

All rights reserved

«
1
2
3
4
...
»

Summary of Contents for Deskphone 6867
































































































































Reviews:

No comments

Related manuals for Deskphone 6867

Brand: Panasonic Pages: 83

Brand: Panasonic Pages: 45

Brand: Panasonic Pages: 129

Brand: HTC Pages: 12

Brand: Kyocera Pages: 2

Brand: Alcatel Pages: 67

Brand: HTC Pages: 58

Brand: Yealink Pages: 8

Brand: Yealink Pages: 19

Brand: Blackberry Pages: 30

Brand: Samsung Pages: 82

Brand: OneTouch Pages: 40

Brand: Ericsson Pages: 77

Brand: Grandstream Networks Pages: 56

STUDIO ENERGY 2

Brand: Blu Pages: 20

Brand: Cellacom Pages: 22

Brand: Samsung Pages: 153

Brand: Samsung Pages: 153

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands