Mitel
®
8560/8660 Phone User Guide – Issue 15, February 2011
Page 19
Personalizing Your Phone
Resetting the Phone to the Default Settings
Resetting the phone to the default settings does the following:
Returns all volume settings to the default levels. See “Changing Volume Levels” on
.
Cancels Background Music. See “Listening to Background Music” on
.
Cancels Callback (queue) requests. See “Requesting a Callback (Queuing the Phone)” on
Restores Handsfree Mode. “Using Handsfree Mode” on
Cancels Manual Call Forwarding. See “Manual Call Forwarding” on
.
Cancels System Forwarding. See “System Forwarding” on
Cancels Do-Not-Disturb (DND). See “Using Do-Not-Disturb” on
Restores Page settings. See “Paging Other System Users” on
Resets hunt group calls. See “Hunt Groups” on
.
To reset your phone to the default settings:
Dial
394
. STATION DEFAULTED appears.
Switching Keymaps
Keymaps are the default button assignments on your phone. Your system administrator may
have programmed an alternate keymap, allowing you to switch between keymap assignments.
Contact your system administrator for more information.
To switch between keymaps when your phone is idle:
With the handset on-hook, dial
399
. The display shows either ALTERNATE (or)
STANDARD KEYMAP IS ACTIVE.
To switch between keymaps during a call:
Press
(Special), and then dial
399
.
Activating Door Relay
If the Activate Door Relay feature is enabled, you can unlock a door (i.e., “buzz” it open)
through your IP phone.
You can enter the Activate Door Relay feature code while idle or while on a call. This allows you
to activate the feature while talking to a communications device mounted at the door without
first having to hang up. When activated while on a call, the feature will not affect the call in
progress other than to show a short confirmation on the display.
You can add the Activate Door Relay feature to a phone keymap button, just like any other
station feature.
To unlock a door:
While idle or while on a call, dial
332
. The door is unlocked.