Mitel 6873 SIP User Manual Download | Manualshive

Page: 80 / 133

background image

80

Mitel 6873 SIP

eud-1744/1.4 – R5.0 HF2 – 10.2017

Personalizing your phone

Configuring general phone settings

This section explains other settings you can make on your phone.

Selecting the language

You wish to select a different user language for your display.

To change both the local user language and the user language of the
MiVoice Office 400 communication system, configure the language set-
tings for your phone over the Self Service Portal only. For more information
about the Self Service Portal, please refer to "MiVoice Office 400 Self Ser-
vice Portal", page 9.

The language selection depends on the language packages your system
administrator installed on your phone. English is the default language and
is included in every language package. Should your desired language not
be available, your system administrator can install more language pack-
ages.

If your desired language is available, but is not displayed or displayed only
in parts, you have to restart your phone (see chapter "Restart phone",
page 83).

Add and connect Bluetooth headset:

1. Press

Bluetooth

.

2. Press

Available devices

.

➔

All available Bluetooth headsets are searched and displayed automatically.

3. Select the desired Bluetooth headset.

➔

The selected headset is connected automatically. Please see the product

specific user's guide of your Bluetooth headset for individual steps you
have to carry out for your headset.

4. Confirm successful connection with the

Ok

softkey.

➔

Your headset can be used, is displayed.

Disconnect Bluetooth headset:

1. Press

Bluetooth

.

➔

Bluetooth mode must be activated.

2. Press

Connected devices

.

3. Press the

key for the desired headset.

4. Confirm the security question with

Yes

.

«
...
78
79
80
81
82
...
»

Summary of Contents for 6873 SIP






































































































































Reviews:

No comments

Related manuals for 6873 SIP

Brand: YASKAWA SIEMENS Pages: 373

Brand: Magnavox Pages: 78

Brand: HEIDENHAIN Pages: 32

SoundPoint IP 501 SIP 2.2

Brand: Polycom Pages: 29

MM2040 TOUCHBOX

Brand: Manta Pages: 16

eyespeak zuvo 12-D

Brand: Talk To Me Technologies Pages: 28

Greengate ControlKeeper 4

Brand: Eaton Pages: 24

Brand: Jensen Pages: 4

Brand: Vantage Hearth Pages: 2

Brand: Akai Pages: 6

Brand: CDK ELECTRONICS Pages: 22

MICHELANGELO BT A 60

Brand: BFT Pages: 84

Brand: Foxtech Pages: 63

Brand: Brahler Pages: 30

CMT-BX1 Marketing

Brand: Sony Pages: 2

AirGENIO SUPERIOR

Brand: 2VV Pages: 12

TOSVERT VF-AS1 Series

Brand: Toshiba Pages: 13

Brand: Toshiba Pages: 317

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands