Phoning
Mitel 6863 SIP / Mitel 6865 SIP
25
eud-1663/1.2 – R4.0 SP1 – 01.2016
Making calls
This section explains how to set your calls.
Answering, ending or rejecting a call
Answering a call:
The phone rings and the message LED and line key
LED flash. If the caller's phone number is received, it is shown on the dis-
play. If the phone number is stored in the private phone book or in the
MiVoice Office 400 communication system, the display also shows the cor-
responding name.
Open listening:
With the open listening mode function, the loudspeaker is
activated in addition to the handset so that other people in the room can
listen to the call. You can continue with the call as usual using the handset.
Rejecting a call:
As long as you have not picked up a call, you can reject
it during the ringing phase.
Answering a call with the handset:
Pick up the handset.
Answer a call with the line key
Press the line key and pick up the handset.
Open listening during a call:
Activate: Press the loudspeaker or loudspeaker/headset key.
Deactivate: Press the loudspeaker or loudspeaker/headset key again.
Ending a call in open listening mode:
Press the loudspeaker or loudspeaker/headset key and put down the handset.
Note:
If you merely replace the handset, the phone switches to the hands-free mode.
Ending a call:
Put the handset on-hook or press the End key.
Rejecting a call:
Press the End key during the ringing phase.
➔
The connection is rejected and, depending on the system configuration, the
caller either hears the busy tone or is forwarded to a preconfigured destina-
tion.