Mitel 6863 SIP User Manual Download Page 14

Page: 14 / 100

Mitel 6863 SIP / Mitel 6865 SIP

eud-1663/1.2 – R4.0 SP1 – 01.2016

Keys, display and menu guidance

Loudspeaker/headset
key with LED
(Mitel 6865 SIP)

• Activating/deactivating open listening
• Activating/deactivating handset microphone
• Activating/deactivating headset microphone

Hash key

Entering # or special characters

Digit keys 1-9

Entering characters and digits

Asterisk key

Entering * or space

Microphone key with
LED

• Activating/deactivating hands-free mode
• Activating/deactivating handset microphone
• Activating/deactivating headset microphone

(Mitel 6865 SIP only)

Volume keys

Adjusting volume

Option key

Calling up a local setting menu (options list)

Hold key

• Holding an active call
• Taking back a call from hold

End key

• Ending a call
• Back to display in idle state
• Exiting editor without changes

Speaker

Rear (Mitel 6863 SIP):

• 100BaseT dual connection for PC and LAN
• Connection for power supply
• Connection for headset
• Connection for Power over Ethernet (PoE)
• Connection for wall mounting

Rear (Mitel 6865 SIP):

• Connection for expansion key module
• Connection for power supply
• Combined four-pin module connection with DHSG headset connection

• GigE dual connection for PC and LAN
• Connection for headset
• Connection for Power over Ethernet (PoE), class 2
• Connection for wall mounting

Use the headset connection for headsets only. Connecting another device may cause dam-

age to your phone and void your warranty.

No. Key

Description

Summary of Contents for 6863 SIP





































































































Search results

Summary of Contents for 6863 SIP

Reviews:

Related manuals for 6863 SIP

Brands by name

Popular brands

Mitel 6863 SIP, User Manual

Search results

Summary of Contents for 6863 SIP

Reviews:

Related manuals for 6863 SIP

Brands by name

Popular brands