3
mvip@mitech-ndt.com
1.6 Configuration
2.Structure and Outline
2.1 Main Unit
2.2 Display
3 Keypad Definition
1
Long press measurement key, put the magnetic base on the surface of workpiece, keep it
stable, the value will be shown out.
2
When the measurement value is stable, release the measurement key, read and record the
value.
3
Press measurement key again can exit the former test and do the new test.
4
Release the measurement key for about 1 minute, it will auto power off.
4.Operation
4.1 Preparations Before Using
1
Install battery
Open the cover, put in the battery.
1
Check the battery voltage
Configuration
NO.
Part name
QTY.
Remarks
Standard
config
1
Main unit
1
2
Short probe
1
3
6F22 battery
1
4
User’s manual
1
5
Warranty
1
Optional
config
6
Long probe
1
7
Earphone
1
8
Sheathe
1
9
Cable (signal line)
1
Measurement
key
Display
Cableline
port
High
frequency
Low
frequency
Acceleration
Speed
Displacement
Parameter key
Frequency key
Measure ke
y
Audio jack
