2
mvip@mitech-ndt.com
1.Overview
MITECH portable vibration meter MV800C is made up of piezoelectric transducer and digital display
circuit. It is mainly used to measure vibration acceleration, speed and displacement of various rotary
machine. This product has the advantages of large measurement, wide variety, intuitively demonstration,
small size, light weight etc. It is widely used in measurement on site or at height and can reduce the
working strength, improve the working efficiency.
1.1 Application
MV800 is mainly used in monitoring the vibration of machines, such as industries of manufacturing,
electric, metallurgy, vehicle etc, specific on the quick check and preventive check of bearing, gear, motor,
fan lathe etc.
1.2 Features
Separate design, small size, stable performance low-consumption,attractive appearance.
Liquid crystal display, humanized interface, easy to operate.
Apply to harsh environment, with anti-electromagnetic interference ability, high accuracy.
High frequency and low frequency measurement, easy to judge fault type of machine.
Equip reliable ring accelerometer, superior than compression type sensor
Auto sleep and auto power off
In accordance with national standard, the measurement value can be compared with ISO2372 to
judge the running state of device.
Signal output, equips with earphone can realize the function of stethoscope.
Signal output equips with oscillometer to monitor and record the vibration.
1.3 Technical Parameters
Vibration pickup: Integrated ring acceleration transducer
Measurement range(displacement): 0.001~1.999mm(Peak to peak: valid value*2√2)
Measurement range(speed): 0.1~19939mm/s (valid value)
Measurement range(acceleration): 0.1~199.9m/s2(peak value: valid value*√2)
Measurement accuracy:
±
5% measured value
Indication error:
±
2
Frequency range: 10Hz~10KHz
Display mode: 3-digit Semi liquid crystal display
Sampling period: 1s
Output signal: AC 2v(peak value, full measurement above 10k)
Dimensions: 185mm*68mm*30mm
Power model: 6F22 9v packed cells
Battery life: continuous use for 30 hours
1.4 Working Principle
MV800C combines the quartz crystal and PZT piezoelectric effect together. When the quartz crystal or
PZT is under strength, the surface generates charger, the vibration was changed into electrical signal by
acceleration transducer. After processing and analyzing, the acceleration, speed and displacement are
shown out in the liquid screen.
1.5 Working Conditions
Operation temperature: 0~50
℃
Memory temperature: -30
℃
~+70
℃
Relative humidity: below 90%RH
