26
4.26 Setting the Display Brightness
Use the function BRIGHT to set the display brightness. You can choose
between four brightness options: 25%, 50%, 75% and 100%.
- Activate the LCD submenu (located in the CFG menu) by pressing the
menu key below it. Four functions will appear down the right side of the
display screen.
- Press the function key next to the selection titled BRIGHT.
- To change the brightness level, continue pressing the function key or
turn the knob.
- The display brightness will remain at the level last displayed.
Note: For the 25% option, the instrument consumes less current and
consequently increases the operating time in battery operation.
4.27 Setting the Display Color
The SYS COLOR value determines the color of the background, the gate and
the DAC/AVG curves. All color schemes are recommended for indoor operation
while S0 and S3 are best suited for outdoor operation.
- Activate the LCD submenu (located in the CFG menu) by pressing the
menu key below it. Four functions will appear down the right side of the
display screen.
- Press the function next to the selection titled SYS COLOR. There are
nine preset color schemes.
- To change the display
’
s color scheme, continue pressing the function
key or turn the knob.
- The display color will remain at the scheme last displayed.
4.28 Setting the A-Scan Color
- Activate the LCD submenu (located in the CFG menu) by pressing the
menu key below it.
- Press the function key next to the selection titled WAV COLOR. There
are eight A-Scan color options.
- To change the A-Scan
’
s color, continue pressing the function key or turn
the knob.
- The A-Scan echo will remain the color last displayed.
NDTzone • Non-Destructive Testing Equipment Specialists
Tel.: +1.877.363.4243 • eMail: [email protected] • Web: www.NDTzone.com