Page | 6 ©
Mitchell & Johnson UK 2015 WLD+211 IB Ver 1.0 Rev 0.0
2.
Safety Information
The following safety and hazard warnings are not only
for the protection of your device, but also serve as a
protection against potential health hazards. Please take
time to read the following instructions carefully.
We assume no liability for personal or
property damage resulting from the failure to
comply with the safety instructions
,
or from
improper operation or handling
.
Under such
circumstances
,
all claims under warranty will
become void
-
For safety and licensing (CE) reasons any
unauthorized modification and/or changes to the
device is prohibited and will void the warranty and
all warranty claims.
-
Any persons operating, installing, setting up, or
servicing this device must be trained and qualified
accordingly, and observe these operating
instructions.
-
Ensure that the device has been set up correctly by
following all the instructions found in the
instruction manual
-
This is a protection class II device. Make sure that
the voltage supply of the power outlet used meets
the required voltage specifications 230V/~50 Hz.
-
Power supply cables should be routed so that they
are not likely to be walked on, squashed or
pinched by items placed upon or against them.
Pay particular attention to cords at plugs, power
outlets, and at the point at which they exit from
the device. Avoid exposing the cable to extreme
heat or cold. Ignoring the above mentioned
instructions could result in cable damage and
present the danger of an electric shock.
-
Should any obvious damage be seen on the device
or on the connection cables, do not contact them
in any way. Switch of the corresponding circuit
breaker in the power distribution panel first,
before carefully unplugging the power plug from
the wall outlet. Do not operate the device further!
Please contact or take it to a qualified service
technician or specialty workshop.
-
In order to completely cut off the power supply to
the device, unplug the power plug from the wall
outlet. Merely turning the device off with the
ON/OFF button is not sufficient. Also make sure
that power outlets are easily accessible.
-
Always pull on the plug’s grips and never on the
cable to remove it from a wall outlet. Unplug the
device from the power outlet if not in use for a
longer period of time.
-
For safety reasons, always unplug the device from
the power outlet during thunder storms.
-
Eliminate potential tripping hazards by routing
cables in such a way that no one can trip or
stumble over them.
-
Never use the device, if the power cable or device
is damaged.
-
Keep packaging and protective foil away from
children at all times to avoid the danger of
suffocation.
-
The device should never come into contact with
water or moisture.
-
To prevent the risk of fire or electric shock make
sure that liquids, such as dripping or splashing
water, rain or moisture, do not come in contact
with the device and power supply plug
-
Operate this device in a moderate climate and
never expose it to extreme temperatures, such as
high humidity.
-
Condensation can build up suddenly if the device
is brought from a colder area into a warmer area
(e.g. when transporting). Should this happen, allow
the device to warm up to room temperature first
before using.
-
Care should be taken so that liquids do not come
in contact with the interior, this is why containers
containing liquids, e.g. buckets, vases or plants
should never be placed anywhere near this
product, including the power supply plug. This
could not only damage the device, but also present
a fire hazard.
-
It is imperative to avoid contact with moisture, e.g.
never operate in the bathroom.
-
Make sure the device is properly ventilated during
operation and never operate it in constricted
areas, such as for example in a bookcase or shelf.
Never block ventilation openings with magazines,
tablecloths, curtains or similar.
-
Make sure the device is placed on a firm and
stable surface.
-
Never place any sources of fire on top of or near
the device and power supply plug (e.g. lighted
candle).
-
Please note that excessive sound pressure created
when listening to loud volume levels with
earphones or headphones can lead to permanent
hearing damage.
-
Please adhere to the additional safety information
found in the individual chapters of this instruction
manual.
-
When connecting other devices, please refer to the
safety and operating instructions found in the
literature accompanying the device.
-
Please contact our technical hotline or a service
technician for further information, should you be
in doubt about device operation, safety or when
making connections, or if any questions arise that
are not explained within this manual.
-
Contribute to a better environment by using a
designated recycling site for the disposal of
packaging material.
