Page | 43 ©
Mitchell & Johnson UK 2015 WLD+211 IB Ver 1.0 Rev 0.0
Buttons do not function (on the WLD+211
and/or remote control)
-
Turn the WLD+211 off and then on again.
-
As an alternative, turn the WLD+211 off, unplug it from the
power outlet and plug in again.
Network connection is not possible
-
The network is not available at the moment. Try again
later.
-
The router restricts access to the listed MAC address of
the unit. You can manually change this setting to allow
the WLD+211 to be recognised by your router. You will
need to obtain the MAC address of your WLD+211. You
can find it by choosing
MENU › System settings › View
settings
-
The WLD+211 may be too far from the wireless router.
Check the distance to the router and adjust accordingly.
-
Change the selected encryption method on the
WLD+211.
-
Use the menu of the WLD+211 to set up the system
manually.
-
Check that your firewall is not preventing access.
-
Check the network cable.
Any repairs other than those mentioned above are to be carried out solely by an authorised technician.