Page | 11 ©
Mitchell & Johnson UK 2013 WLD+211 IB Ver 1.0 Rev 0.0
Inserting/changing batteries
The remote control requires two “AAA” batteries to operate.
Remove the battery compartment lid carefully. Remove the
used batteries. Insert new batteries, observing the correct
polarity as displayed inside the remote. Replace the battery
lid carefully.
Information on handling batteries and rechargeable
batteries
Please adhere to the following information when handling
batteries and rechargeable batteries.
-
Keep batteries out of children’s reach.
-
Batteries are hazardous and do not belong
in household waste.
-
Ensure correct polarity when inserting
batteries.
-
Always remove batteries when the remote
control is not in use for long periods of time.
-
Never leave batteries lying around
unsupervised. If swallowed these could pose
a choking hazard to children and pets. Seek
emergency medical care immediately,
should this happen.
-
Never expose batteries to extreme
temperatures, such as sunlight, fire, ovens,
etc. there is a risk of explosion!
-
Make sure that batteries are not dismantled,
short-circuited or are thrown into fire. Never
re-charge non-rechargeable batteries. There
is a risk of explosion!
-
Always follow the manufacturer's
instructions when recharging rechargeable
batteries.
-
Touching leaking or damaged batteries
could cause skin burns. Use protective
gloves suitable for handling such batteries.
-
Always ensure that the device has been
turned off after use.
-
Always change/replace all batteries at the
same time.
-
If required clean battery and device contacts
before inserting,
