MiTAC N496 Series, User Manual

Page: 12 / 17

11
y
Never clean your device with it powered on. Use a soft, lint-free cloth to wipe the
screen and the exterior of your device.
y
Do not use paper towels to clean the screen.
y
Never attempt to disassemble, repair or make any modifications to your device.
Disassembly, modification or any attempt at repair could cause damage to your device
and even bodily injury or property damage and will void any warranty.
y
Do not store or carry flammable liquids, gases or explosive materials in the same
compartment as your device, its parts or accessories.
y
To discourage theft, do not leave the device and accessories in plain view in an
unattended vehicle.
y
Do not expose the device to extreme heat or direct sunlight for prolonged periods.
Overheating may damage the device.
Regulatory information
y
For regulatory identification purposes, the product series is assigned a model number
of N496(x) (the optional "x" representing a potential model in the product series).
y
Wi-Fi 5G Band 1 is for indoor use only.
FCC
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one of the following measures:
y
Reorient or relocate the receiving antenna.