153
LCD PC E
LCD PC E
-
-
8188 MAINTENANCE
8188 MAINTENANCE
Power and Ground Signals
Name Description
Vcc3_3
3.3 V supply for core well I/O buffers. This power may be shut off in S3, S4, S5 or
G3 states.
Vcc1_5
1.5 V supply for core well logic. This power may be shut off in S3, S4, S5 or G3
states.
VccHI
1.5 V supply for Hub Interface 1.5 logic.
1.8 V supply for Hub Interface 1.0 logic.
This power may be shut off in S3, S4, S5 or G3 states.
V5REF
Reference for 5 V tolerance on core well inputs. This power may be shut off in S3,
S4, S5 or G3 states.
HIREF
Analog Input. Expected voltages are:
• 0.9 V for HI 1.0 (Normal Hub Interface) Series Termination
• 350 mV for HI 1.5 (Enhanced Hub Interface) Parallel Termination
This power is shut off in S3, S4, S5, and G3 states.
VccSus3_3
3.3 V supply for resume well I/O buffers. This power is not expected to be shut off
unless the system is unplugged.
VccSus1_5
1.5 V supply for resume well logic. This power is not expected to be shut off
unless the system is unplugged.
V5REF_Sus
Reference for 5 V tolerance on resume well inputs. This power is not expected to
be shut off unless the system is unplugged.
VccRTC
3.3 V (can drop to 2.0 V min. in G3 state) supply for the RTC well. This power is
not expected to be shut off unless the RTC battery is removed or completely
drained.
NOTE:
Implementations should not attempt to clear CMOS by using a jumper to
pull VccRTC low. Clearing CMOS in an Intel® ICH4-based platform can be done
by using a jumper on RTCRST# or GPI, or using SAFEMODE strap.
VccPLL
1.5 V supply for core well logic. This signal is used for the USB PLL. This power
may
be shut off in S3, S4, S5, or G3 states.
VBIAS
RTC well bias voltage. The DC reference voltage applied to this pin sets a current
that is mirrored throughout the oscillator and buffer circuitry.
V_CPU_IO
Powered by the same supply as the processor I/O voltage. This supply is used to
drive the processor interface outputs.
Vss
Grounds.
6.3 Intel 82801DB I/O Controller Hub 4 (ICH4)
Summary of Contents for E - 8188
