BW-1tlg.-KH-Gew-Hand
- EN 15-
ENGLISH
Activity description ball valve
Installation of a ball valve with threaded connection
The installation may occur in state without pressure only. Do not abuse the actuator as lever!
To the connection of the ball valve with your pipe system you need a spanner width from X mm.
Attach suitable sealing compounds to the pipe ends, if you use PTFE
tape or hemp seals follow the direction of thread.
Use only to the purpose suitable sealing compound.
Please pay attention to the fact that the used sealing compounds means are suitable for the
flowing medium!
Screw pipe ends into the threaded ends of the ball valve, only use the
spanner surfaces of the ball valve -
do not use the hand lever!
Do not give pressure on the piping before the sealing material is
hardened.
Pictures are only exemplary view!
