BW-1tlg.-KH-Gew-Hand
- EN 10 -
ENGLISH
Translation of the original installation and maintenance manual
Safety instructions
Safety instructions for assembly and initiation: The initiation of the valve is unauthorized until it
complies with the conditions of the machinery directive 2006/42/EC.
Assembly, maintenance and repairing of the valves are allowed for authorised and qualified
professionals only.
Modifications of the valve and the use of non-authorized spare parts exclude the liability of resulting
damage.
National directives for the prevention of accidents as well as local safety instructions of the user are
paramount and are not replaced by this document.
It is not allowed to use the valves, if the operating conditions do not match the pressure-temperature-
diagram and the medium resistance.
If you demount a valve in a piping, medium may drop out. Therefore, if the medium is hazardous to
health, the piping must be emptied completely. Be careful with residues that may flow out later.
Installation in unpressurized and non-energized state only!
For connecting the valve to the piping system a suitable wrench is required.
Do not abuse the hand lever / actuator / solenoid as a lever!
Please pay attention to the fact that the used sealing compounds means are suitable for the flowing
medium!
The power supply must be done on site by a qualified electrician!
Danger of injury! Do not put parts of your body or other things into the valves. This can cause heavy
injuries and should be absolutely avoided!
Residue of the operating medium may cause danger. If necessary wear safety shoes, gloves and
glasses.
