background image

5

RECHARGING BATTERY

1.   Before charging, make sure the battery is 

correctly installed.

2.   The procedure of charging the product is as 

follows: Connect the adapter output plug 
into the DC jack of the vacuum, then plug 
adapter into domestic power supply outlet.

 

The blue indicator light will flash, indicating it is 
charging.

NOTE: If the  vacuum itself is powered 

On, the indicator light will flash 

alternately Red and Purple when 

charging the unit. 

Switch the power to the vacuum Off and 

the indicator light will flash Blue.

3.   After fully charged, the indicator light will turn 

to solid blue light.

4.   When the product runs out of power, LED 

indicator will turn red, which prompts the user 
to charge the product.

5.   To ensure the best performance and life span 

of the battery, please charge the product 
for at least 3 hours continuously. After fully 
charged for 3 hrs, indicator light will turn to 
solid blue light. The product can be operated 
after 3 hours charging.

                            Adapter Plug to DC jack

GENERAL OPERATION

Starting Operation

1.   Place the product in a room with all 

unwanted obstacles removed, turn On the 
power of the vacuum. The vacuum does now 
start vacuuming.

NOTE: The power indicator light turns OFF 

during operation.

2.   When the vacuum runs out of power, the Red 

indicator light will illuminate and unit will stop 
operating.

Note: The red indicator light will turn 

off automatically when leaving it for 

approx. 5 minutes.

Note: the indicator light will turn off 

automatically even if the power Off 

button has not been pressed.

Note: This product is not suitable for 

long-pile carpets.

SIDE BRUSH INSTALLATION

Position both the left and right hand marked 
brushes on the corresponding L & R marked 
locations on the vacuum and push down to X to 
secure it.
To remove brushes simply pull them upwards.

                 

CLEANING AND MAINTENANCE

Cleaning Dust Bin

1.  Open the upper cover by lifting the lid near 

the power ON/OFF button.

2.   Put your finger into the dust bin groove and 

grip to take it out.

1

2

3.   Open the dust bin lid.

4.   Take out the inner filter.

5.   Empty the dirt in the dust bin.

Summary of Contents for Robovac









Reviews: