background image

4

Battery and Recharging 

Instructions

1.   The battery is rechargeable, please use the 

voltage specified on the packaging. If you 
are not sure of the voltage current of your 
house, please check with your electricity 
provider.

 

(Only use battery pack which is provided by 
the manufacturer, please check the polarity 
before installing the battery.

 

Battery pack: 11.1V 1500mA

2.   Only use the original battery and power 

adapter with the product for charging.

3.   Charging adaptor is for indoors use only.

4.   Do not recharge the product if the battery 

cord or plug is damaged.

5.   Never touch the charger, plug or cable with 

damp hands.

6.   Before cleaning the product, unplug the 

adaptor, switch Off the unit and remove the 
battery.

7.   Please remove the battery when it is not in 

use for a long time.

8.  The battery must be removed from the 

product before it is scrapped.

9.   The product must be disconnected from 

the power source when removing the 
battery. The battery is to be disposed of 
in accordance with your local council 
regulations.

PRODUCT FEATURES

This revolutionary Mini Robotic Vacuum Cleaner 
is equipped with functions suitable for cleaning 
up floor surfaces of home and office, such as 
wood, tile, and linoleum. 

Random

Spiral

Along the wall 

Spiral

Indicator light:

No. Indicator 

light

Status

1

OFF

1.Not Powered On or in 
   operation
2.Battery low condition

2

Red

1.Battery low condition
2.The unit is lifted with 
   power On.
3.Side brush or wheel are 
   overloaded due to 
   obstructions.

3

Blue

1.Battery is full charged.

4

Flashing  
blue

1.Battery is charging.

5

Flashing red 
or purple 
when the 
battery is 
charging

1.The unit is not powered 
   Off when charging.

BATTERY INSTALLATION AND REMOVAL

1.   Before installing or removing the battery, 

the product must be disconnected from the 
power source.

2.   Open the battery cover.

3.   Insert the battery into the battery 

compartment and close the cover. Make 
sure the cover clips and secures into position.

        

Summary of Contents for Robovac









Reviews: