12
oPerating tHe remote control
seTup The remoTe
1 . Install included (2) AAA batteries in the remote control .
•
Turn the remote control over and locate the battery door on the rear of the unit .
•
Press on the remote door arrow and slide in the direction indicated by the arrow .
•
Insert batteries as pictured on the inside of the battery compartment .
imPortant:
Insert batteries negative (-) side first into the slots , pushing it into the coil
and then into the compartment . Do not insert batteries positive (+) side first .
•
Place battery door over compartment, lining up the door tab with the opening on the
remote . Slide the door until it securely snaps into place .
pairing The remoTe
The projector is primarily controlled through the included remote .
imPortant:
The distance between the remote and the projector should be 6 .5 feet or less .