OPERATIONS AND FUNCTIONS
Add Water
1. Remove the nozzle and turn the water tank upside down.
2. Remove the tank cap and fill the tank with clean and cool water only.
3. Attach the tank cap and place the tank back onto the base. Make sure it fits together securely so
that water can go from the tank to the reservoir. Put the nozzle back on.
1. If tap water is too hard, it is recommended to use filtered or distilled water to avoid white dust.
DO NOT use hot water.
2. DO NOT add any essential oils or medicinal tablets into the water tank.
3. DO NOT add water into the base or through nozzle.
4. DO NOT move the humidifier while the water tank is full of water to avoid leakage or base overfilling.
07
08
Plug the power cord into a wall socket. Now the humidifier is ready for use.
1. Rotate the control knob clockwise to the ON position. The blue LED indicator will light up indicating
that the humidifier has been turned on .
2. Keep rotating the control knob clockwise to increase the mist level.
3. Rotate the control knob counterclockwise to decrease the mist level.
4. Rotate the control knob counterclockwise to the OFF position to turn off the humidifier.
The LED indicator will turn off. The fan will work for another 3 minutes to dry the mist tube.
Power On / Off and Mist Adjustment
Light Control
Low Water Protection: Auto Shut-off the Humidifier
1. Press the Light Button to turn on / off the night light.
2. Press and hold the Light Button for 1.5 seconds to turn on / off the tank light.
When there is not enough water inside the water reservoir, the humidifier will stop misting and the LED
indicator will become red. It is designed for safety concern to prevent the humidifier from possibly
overheating and damaging the atomizer.
Note:
The most comfortable environmental humidity is between 40%-60%. Please adjust the mist output
as needed.
2
3
4
1
Min
ON
OFF
Max
5
Min
ON
OFF
Max
2
1
3
Min
ON
OFF
Max
4
Min
ON
OFF
Max
Min
ON
OFF
Max
Min
ON
OFF
Max
