Mirka® LEROS Random Orbital Sander • 225 mm (9") • 100–240 V & 110 V
37
Compliance
This device complies with part 15 of the FCC Rules . Operation is subject to the following two conditions:
1 . This device may not cause harmful interference .
2 . This device must accept any interference received, including interference that may cause undesired operation .
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules . These limits are designed to provide reasonable protection against harmful interference in a
residential installation . This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications .
However, there is no guarantee that interference will not occur in a particular installation . If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna .
• Increase the separation between the equipment and receiver .
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected .
• Consult the dealer or an experienced radio/TV technician for help .
CAUTION TO THE USER: Changes or modification not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment . This device complies with Industry Canada’s licence-exempt
RSSs . Operation is subject to the following two conditions:
1 . This device may not cause interference; and
2 . This device must accept any interference, including interference that may cause undesired operation of the device .
Technical data
Mirka® LEROS
950CV
Power
250 W
Mains voltage
100–120 VAC
Speed
4,000–8,000 rpm
Orbit
5 .0 mm (3/16")
Size of backing pad
Ø 225 mm (9")
Weight
3 .5 kg (7 .72 lbs)
Degree of protection
I
Noise and vibration information
Measured values are determined according to EN 62841-1 .
Mirka® LEROS
950CV
Sound pressure level (L
pA
)
73 .0 dB(A)
Sound power level (L
WA
)
84 .0 dB(A)
Sound measurement uncertainty K
3 .0 dB
Vibration emission value a
h
*
1 .1 m/s
2
Vibration emission uncertainty K *
1 .5 m/s
2
Specifications subject to change without prior notice . Model range may vary between markets .
en | us • ca
