Mirion Technologies UltraRadiac-Plus, User Manual, Page: 50 / 81

The Source Finder Mode
•
Press the
CLR/TEST
key to return to
the Rate Mode or wait about 10
seconds.
The Source Finder Mode
The Source Finder Mode allows the unit to
locate an isolated source. In this mode, the
unit will start clicking if the unit is near
radioactive material. As you move closer to
the radioactivity (or further away), the unit
will click faster (or slower).
For best results, aim the top of the unit at the
suspected source of the radiation.
The Rate and Dose modes are active when the
Source Finder Mode is enabled. This means
that you can read the higher Rate or Dose
without exiting the Source Finder Mode.
Enabling the Source Finder Mode
To enable the Source Finder Mode:
•
Press and hold the
RATE
key until the
display changes to a flashing
1
.
•
Release the
RATE
key.
41