DIP Switch Settings
6
On the RAX-1048
(TZ)
Adder
Annunciator Chassis:
P1:
Connects to the Main Annunciator
Chassis, or to the previous Adder
Annunciator Chassis.
P2:
Connects to the Next Adder
Annunciator Chassis.
On the RAM-1032
(TZ
)
Main
Annunciator Chassis:
P2:
Connects to the first Adder
Annunciator Chassis.
P3,P11:
Not used.
Jumpers:
Factory set.
Do not change
.
Terminals:
See
Wiring Instructions
on
page 3 for details.
SW1, SW2:
Set DIP Switches as
described in “DIP Switch Settings” on
page 4
.
JW6:
RS-485 termination jumper.
Remove on all except for last RAM-
1032(TZ).
On the RAM-1016(TZ) Main Annunciator Chassis:
P2:
Not used. No expansion allowed.
P3,P11:
Not used.
Jumpers:
Factory set.
Do not change
.
Terminals:
See
Wiring Instructions
on page 3 for details.
SW1, SW2:
Set DIP Switches as described in “DIP Switch Settings” on page 4.
JW6:
RS-485 termination jumper. Remove on all except for last RAM-1016(TZ).
P2
ADDER ANNUNCIATOR BOARD
P2
P3
JUMPERS
TERMINALS
P11
SW1
SW2
MAIN ANNUNCIATOR BOARD
P1
;;
;;
JW6