![background image](http://html1.mh-extra.com/html/mircom/flex-net-fx-2003-12nds/flex-net-fx-2003-12nds_installation-and-operation-manual_1805816113.webp)
FleX-Net
TM
Installation and Operation Manual
111
Figure 75:
Mechanical I nstallation of the TNC- 5000 w ithin the BB- 5008 and BB-
5014
Typical Addressable Telephone Set- up
The typical addressable telephone set-up is with an addressable fire alarm system using the TNC-5000 and from
the TNC-5000 to the Master Telephone (QMT-5302N/V). The selector panels (QAZT-5348DS or QAZT-5302DS)
are connected to the Master Telephone by cable only. The MIX-M500FP(A) Control Modules are connected to the
addressable loop from the FX-2000N and to each other and the Master Telephone. Remote telephones are
connected to the control modules.
Figure 76: Typical Addressable Telephone Set- up
ANC-5000
Partial Interior View
(to right of main board)
TNC-5000
5
6
4
8
9
7
Metal plate mounts
over positions 4 to 9
inclusive
TNC-5000 board
mounts over ANC-5000
board
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
Remote Telephones
Remote Telephones
Remote Telephones
Remote Telephones
MIX-M500FP(A)
CONTROL
MODULE
MIX-M500FP(A)
CONTROL
MODULE
MIX-M500FP(A)
CONTROL
MODULE
MIX-M500FP(A)
CONTROL
MODULE
QMT-5302NV/N
ADDRESSABLE
MASTER
TELEPHONE
TNC-5000
TELEPHONE
NETWORK
CONTROLLER
MODULE
QAZT-5348DS or
QAZT-5302DS
ADDRESSABLE
TELEPHONE
SELECTOR
FX-2000N
FIRE ALARM PANEL
Addressable Loop