SYSTEM HOOK-UP
Mount the terminal board to the bottom left-hand corner of the backbox housing using the two #8
self-tapping screws provided.
Connect the wires to the terminal block as shown in the wiring diagram on the previous page. Before
powering up, ensure that all lines are free of shorts. If phone/auxiliary inputs are used, connect the
music input wires to terminal
L, R and C
of the terminal board. Terminal C is the common terminal.
Fasten the master station support hinge to the housing as shown in the diagram below. If an external
antenna wire is to be used, connect it with the wire which is attached to the FM ant terminal on the
radio module. Once all field wiring is completed, plug the connectors from the Master station into
P1
and
P2
on the terminal board.
