(
(3) Click on the left of what have been selected the SD card disk, click
on the right and then show the following
options, select the
format and click the lef key (Figure 35).
Figure 34
Figure 35
18
Don’t vigorously pull the wire when wiring to prevent pull off wire,
and also be careful to don’t damage wires to prevent short-circuit
when twisted the screws.Then adjustable the video location of with
cameras angles.With drill make more than 3 screw holes, using screws
to a fixed base of the camera, the camera covered with a shield fragile
stickers affixed
.
3-3 The installation of magnetic switch
on the door(Menci)
Shown in Figure 4, install Menci switches
Before drill the screw holes must make sure that
the distance between Menci A and Menci B the
relative position of principle is not to shut the
door after the oppression Menci A or Menci B,
Menci A and B among the best distance of about
2mm
.
Requested Menci switch wire connect the
absence(non-power-state) after closed the door,
also Menci switch line for the power after open
the door. Ensure the position, with
drill make 2
screw holes
.
With 2 screws to fix switch Menci .
The Menci switch wire wiring with the same cameras.
Figure 4
03
